Jova42R Posted February 21, 2020 Share #1526 Posted February 21, 2020 13 hours ago, XcelsiorBoii4888 said: I can confirm that the tracks extend to 101st, but they have a wall blocking the tracks right after 95st. Those tracks were supposed to continue onto Staten Island but that never came into fruition. Wasn't the tunnel to Staten Island meant to be started under Owl's Head Park (at 67th St - see article)? 42 minutes ago, subwaycommuter1983 said: https://www.nytimes.com/2019/01/18/nyregion/staten-island-subway-dreams.html 0 Quote Link to comment Share on other sites More sharing options...
biGC323232 Posted February 21, 2020 Share #1527 Posted February 21, 2020 12 hours ago, Elloss said: Here we go again... Here we go again...What are u talking about...🤔 0 Quote Link to comment Share on other sites More sharing options...
LTA1992 Posted February 21, 2020 Share #1528 Posted February 21, 2020 (edited) 15 hours ago, Jova42R said: Wasn't the tunnel to Staten Island meant to be started under Owl's Head Park (at 67th St - see article)? The original plan was that. But with that tunnel project cancelled, they decided to extend the existing subway to 95th Street. This was in preparation to extend it again to a station at 101st Street providing connection to a ferry that would have run until a further extension to SI was built. I haven't walked that far down 4th Avenue in ages, so I don't remember if there is ventilation for a tunnel. Even the 1970s sections of SAS had evidence (grates sealed with concrete, something I found because I had to tie my shoe) so if there's really a tunnel built, it would be seen. Edited February 21, 2020 by LTA1992 0 Quote Link to comment Share on other sites More sharing options...
MHV9218 Posted February 25, 2020 Share #1529 Posted February 25, 2020 Note from the board meeting: the R211 contract is sticking with the demo order of open gangway cars only. Despite the decision to order exclusively open gangway cars for the R262s, it's apparently too late for serious changes to the R211 contract, so things are sticking as they were. 0 Quote Link to comment Share on other sites More sharing options...
Lex Posted February 25, 2020 Share #1530 Posted February 25, 2020 9 hours ago, MHV9218 said: Note from the board meeting: the R211 contract is sticking with the demo order of open gangway cars only. Despite the decision to order exclusively open gangway cars for the R262s, it's apparently too late for serious changes to the R211 contract, so things are sticking as they were. Are you talking about the base order's R211T restriction, or are you saying all but those few R211s (including options) will have open gangways? 0 Quote Link to comment Share on other sites More sharing options...
MHV9218 Posted February 25, 2020 Share #1531 Posted February 25, 2020 45 minutes ago, Lex said: Are you talking about the base order's R211T restriction, or are you saying all but those few R211s (including options) will have open gangways? The board was curious if it was too late to spec open gangway car beyond the R211Ts. The answer was that it is: only the R211T cars will have open gangways, and the rest of the base order will be standard. The option cars can still be changed to open gangway spec, which it sounds like they might do. 0 Quote Link to comment Share on other sites More sharing options...
YungMarxian Posted February 25, 2020 Share #1532 Posted February 25, 2020 Is it known whether the R211A's might be assigned to relieve the R46's at Coney Island? Or are the R211's going to go to Jamaica and the R160's will return to Coney Island? Or is there really just no information on that yet? 0 Quote Link to comment Share on other sites More sharing options...
Lawrence St Posted February 25, 2020 Share #1533 Posted February 25, 2020 Why are they so quick to order open gang way cars when they havent even arrived yet for testing? 3 Quote Link to comment Share on other sites More sharing options...
Lex Posted February 25, 2020 Share #1534 Posted February 25, 2020 1 hour ago, Lawrence St said: Why are they so quick to order open gang way cars when they havent even arrived yet for testing? Perhaps it has something to do with the ridership (existing and potential). Aside from the standard fare, most of the testing for the R211Ts will obviously boil down to how well the links are constructed and how they perform with tight curves. 0 Quote Link to comment Share on other sites More sharing options...
SubwayFan3000 Posted February 25, 2020 Share #1535 Posted February 25, 2020 7 hours ago, YungMarxian said: Is it known whether the R211A's might be assigned to relieve the R46's at Coney Island? Or are the R211's going to go to Jamaica and the R160's will return to Coney Island? Or is there really just no information on that yet? I Hope 0 Quote Link to comment Share on other sites More sharing options...
XcelsiorBoii4888 Posted February 26, 2020 Share #1536 Posted February 26, 2020 8 hours ago, Lawrence St said: Why are they so quick to order open gang way cars when they havent even arrived yet for testing? The shit works in every other system that has it. You're acting like this is the only subway system with tight curves LMAOO. Go explore the world, you'll be surprised at what actually exist. The only thing the MTA needed to test was how well people can walk through the cars given that MTA cars have been closed off for a LONG TIME, especially on the BMT, and because some of the curves can decrease the walking space between cars, other than that...there's no other safety issues that prove they're a problem here. All those ethical issues about homeless, etc (which are all temporary issues, shouldn't isolate something that promotes CAPACITY in a city that's constantly growing. Especially for subway cars that are built to last 40years...these R211s/R262s should've been ALL open-gangway...the R179 should've had a test set in that batch...but that's the MTA not thinking into the future. 8 Quote Link to comment Share on other sites More sharing options...
Lawrence St Posted February 26, 2020 Share #1537 Posted February 26, 2020 1 hour ago, XcelsiorBoii4888 said: The shit works in every other system that has it. You're acting like this is the only subway system with tight curves LMAOO. Go explore the world, you'll be surprised at what actually exist. The only thing the MTA needed to test was how well people can walk through the cars given that MTA cars have been closed off for a LONG TIME, especially on the BMT, and because some of the curves can decrease the walking space between cars, other than that...there's no other safety issues that prove they're a problem here. All those ethical issues about homeless, etc (which are all temporary issues, shouldn't isolate something that promotes CAPACITY in a city that's constantly growing. Especially for subway cars that are built to last 40years...these R211s/R262s should've been ALL open-gangway...the R179 should've had a test set in that batch...but that's the MTA not thinking into the future. My main concern was with the R262 order, since there was no test train to measure out the curves on the IRT, and the IRT has worse curves then the BMT (City Hall comes to mind). I'm just saying before we start ordering articulated trains all over the place, see how the first pilot does in actual service. 2 Quote Link to comment Share on other sites More sharing options...
darkstar8983 Posted February 26, 2020 Share #1538 Posted February 26, 2020 (edited) 2 hours ago, XcelsiorBoii4888 said: The shit works in every other system that has it. You're acting like this is the only subway system with tight curves LMAOO. Go explore the world, you'll be surprised at what actually exist. The only thing the MTA needed to test was how well people can walk through the cars given that MTA cars have been closed off for a LONG TIME, especially on the BMT, and because some of the curves can decrease the walking space between cars, other than that...there's no other safety issues that prove they're a problem here. All those ethical issues about homeless, etc (which are all temporary issues, shouldn't isolate something that promotes CAPACITY in a city that's constantly growing. Especially for subway cars that are built to last 40years...these R211s/R262s should've been ALL open-gangway...the R179 should've had a test set in that batch...but that's the MTA not thinking into the future. You should see the sharp turns in the Toronto Metro and it’s artriculated trains on Line 1 (The Toronto Rocket if I’m not mistaken). People can quickly lose their balance if the right handlebars are not installed, especially the speed at which the trains take those turns. even more important now that we’re increasing speed limits to keep trains moving and upgrading signals Edited February 26, 2020 by darkstar8983 1 Quote Link to comment Share on other sites More sharing options...
XcelsiorBoii4888 Posted February 26, 2020 Share #1539 Posted February 26, 2020 24 minutes ago, Lawrence St said: My main concern was with the R262 order, since there was no test train to measure out the curves on the IRT, and the IRT has worse curves then the BMT (City Hall comes to mind). I'm just saying before we start ordering articulated trains all over the place, see how the first pilot does in actual service. Even though the IRT has sharper curves, the subway cars are shorter, and the wheelbase is closer towards the end of the car, reducing the amount of overhang of the carbody that's bending when making turns around curves...therefore, when the trains are making turns, it doesn't alter the walking distance between trains that drastic. The subway cars that would have gangway issues are the 75ft cars, due to the fact that they're longer, and the wheelbase is not directly at the end of the car...this leads to an overhang of the carbody that causes the cars to drastically shift when making turns around curves. If you ride the train through lower Manhattan you'll notice at times you won't be able to look into the next car. 60ft cars don't have the issue as bad, because the cars are shorter and the wheelbase doesn't create a drastic overhang of the carbody when turning around curves. So it's not really the curves, it's about being able to safety walk through while the train is maneuvering through the curves. 6 Quote Link to comment Share on other sites More sharing options...
Emil Posted February 26, 2020 Share #1540 Posted February 26, 2020 considering that so far 30 cars have been built so far, I'm assuming they're all standard trains? 0 Quote Link to comment Share on other sites More sharing options...
LTA1992 Posted February 27, 2020 Share #1541 Posted February 27, 2020 23 hours ago, Lawrence St said: My main concern was with the R262 order, since there was no test train to measure out the curves on the IRT, and the IRT has worse curves then the BMT (City Hall comes to mind). I'm just saying before we start ordering articulated trains all over the place, see how the first pilot does in actual service. If Paris Metro can run them, anyone can. 0 Quote Link to comment Share on other sites More sharing options...
R32 3838 Posted March 5, 2020 Share #1542 Posted March 5, 2020 I think the base order R211's would be pitkin/ Coney island since these are the regular cars. It makes more sense to give the option order to Jamaica instead of the base order since it'll likely be open gangway and those cars could bump out some of the R160's elsewhere. Since the base order is 440 standard cars. Pitkin could get about 200 while CI could get 240. I know this is speculation but it makes the most sense. The 20 R211T's could be based out of Jamaica once all the testing is done. 0 Quote Link to comment Share on other sites More sharing options...
subwaycommuter1983 Posted March 5, 2020 Share #1543 Posted March 5, 2020 2 hours ago, R32 3838 said: I think the base order R211's would be pitkin/ Coney island since these are the regular cars. It makes more sense to give the option order to Jamaica instead of the base order since it'll likely be open gangway and those cars could bump out some of the R160's elsewhere. Since the base order is 440 standard cars. Pitkin could get about 200 while CI could get 240. I know this is speculation but it makes the most sense. The 20 R211T's could be based out of Jamaica once all the testing is done. It does make sense. Right now, the majority of the r46's are at Pitkin/Coney island yards and it makes a lot of sense to have the r211T's operate on the most crowded lines. 0 Quote Link to comment Share on other sites More sharing options...
VIP Posted March 6, 2020 Share #1544 Posted March 6, 2020 12 hours ago, R32 3838 said: I think the base order R211's would be pitkin/ Coney island since these are the regular cars. It makes more sense to give the option order to Jamaica instead of the base order since it'll likely be open gangway and those cars could bump out some of the R160's elsewhere. Since the base order is 440 standard cars. Pitkin could get about 200 while CI could get 240. I know this is speculation but it makes the most sense. The 20 R211T's could be based out of Jamaica once all the testing is done. The Open gangway R211’s can send off the Siemens from Jamaica to 207th Street. 0 Quote Link to comment Share on other sites More sharing options...
R32 3838 Posted March 6, 2020 Share #1545 Posted March 6, 2020 8 hours ago, VIP said: The Open gangway R211’s can send off the Siemens from Jamaica to 207th Street. that's what i think is gonna happen, have the majority of them run on the with a few on the along side the R179's and R211's. 0 Quote Link to comment Share on other sites More sharing options...
Lawrence St Posted March 14, 2020 Share #1546 Posted March 14, 2020 Is the pilot R211 being built in Japan or in the Yonkers facility? 0 Quote Link to comment Share on other sites More sharing options...
R32 3838 Posted March 14, 2020 Share #1547 Posted March 14, 2020 5 hours ago, Lawrence St said: Is the pilot R211 being built in Japan or in the Yonkers facility? Body is being built in Nebraska and everything else in yonkers 0 Quote Link to comment Share on other sites More sharing options...
Lawrence St Posted March 14, 2020 Share #1548 Posted March 14, 2020 26 minutes ago, R32 3838 said: Body is being built in Nebraska and everything else in yonkers So how come the mockups always have to be built in Japan? 0 Quote Link to comment Share on other sites More sharing options...
Around the Horn Posted March 14, 2020 Share #1549 Posted March 14, 2020 53 minutes ago, Lawrence St said: So how come the mockups always have to be built in Japan? That's how Kawasaki operates (someone else can correct me if I'm wrong). Corporate deals with everything in Japan until the customer is satisfied with the design and gives approval for construction to start. 2 Quote Link to comment Share on other sites More sharing options...
OrionVIIonM79 Posted March 14, 2020 Share #1550 Posted March 14, 2020 Thank god bombardier is not building these cars. Look what they did to the R179s 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.