Bus Guy Posted December 20, 2010 Share #1 Posted December 20, 2010 Could a 60ft car run anywhere on the IRT? I know a few lines here and there are built to BMT standards(minus platforms widths) and could handle a 60ft car. 0 Quote Link to comment Share on other sites More sharing options...
Queens Surface Posted December 20, 2010 Share #2 Posted December 20, 2010 The only place would be on the IRT Flushing Line east of Queensboro Plaza...which I was reading somewhere that it was built to BMT car lengths. 0 Quote Link to comment Share on other sites More sharing options...
553 Bridgeton Posted December 20, 2010 Share #3 Posted December 20, 2010 10x60=600ft of 10 60ft cars 10x51=510ft of 51ft cars 11x51=561ft of 51ft cars Now the reason the can run 11 cars is because it was built to bmt specs, so 10 60ft cars could run there, but the platform would be shaved off due to the width of 60ft cars. The line is the only IRT Line to be on a B Div radio channel. 0 Quote Link to comment Share on other sites More sharing options...
Kamen Rider Posted December 20, 2010 Share #4 Posted December 20, 2010 Please, watch the Nazi Banksters Crimes Ripple Effect at http://jforjustice.co.uk/banksters 0 Quote Link to comment Share on other sites More sharing options...
Fresh Pond Posted December 20, 2010 Share #5 Posted December 20, 2010 Technically, any IRT tunnel built under the Dual Contracts (anything built before that, I'm not so sure) can run a 60' car but the only drawback is that the platforms will have to be shaved back about a foot, and various rooms, signals, and other things will have to be moved. 0 Quote Link to comment Share on other sites More sharing options...
N-Trizzy2609 Posted December 20, 2010 Share #6 Posted December 20, 2010 The IRT Main can NOT handle a 60 foot car anywhere underground. The and Dyer Avenue can theoretically operate a 60 foot car outside. Platforms shaved back of coruse. Shit....The Dyer Avenue Line can handle Shoreliner cars and Genesis's if properly converted. 0 Quote Link to comment Share on other sites More sharing options...
Melvin Posted December 21, 2010 Share #7 Posted December 21, 2010 The IRT Main can NOT handle a 60 foot car anywhere underground. The and Dyer Avenue can theoretically operate a 60 foot car outside. Platforms shaved back of coruse. Shit....The Dyer Avenue Line can handle Shoreliner cars and Genesis's if properly converted. God I wish you would've not said that, I know a certain individual that is going to foam because of that statement. I heard before that a R160 could run on the express track to a certain station after Queensboro Plaza, without any radical modifications. 0 Quote Link to comment Share on other sites More sharing options...
DOB2RTO Posted December 21, 2010 Share #8 Posted December 21, 2010 Junius St station on the , is already tight for 10 51ft cars. It may need some extention, but some of the others are quite long. It would be nice to have 60ft cars. I see you did ask about 60 cars, but you did not mention if you meant, 60ft cars that are 10ft wide, or 60ft cars that can be 9ft wide, for IRT width. With them updating the platform edges now, they should have updated it to be able to handle 10ft wide cars, for the future. Then add on an 6 inch extention, for the current IRT cars....... 0 Quote Link to comment Share on other sites More sharing options...
Bus Guy Posted December 21, 2010 Author Share #9 Posted December 21, 2010 Junius St station on the , is already tight for 10 51ft cars. It may need some extention, but some of the others are quite long. It would be nice to have 60ft cars. I see you did ask about 60 cars, but you did not mention if you meant, 60ft cars that are 10ft wide, or 60ft cars that can be 9ft wide, for IRT width. With them updating the platform edges now, they should have updated it to be able to handle 10ft wide cars, for the future. Then add on an 6 inch extention, for the current IRT cars....... Yeah i was thinking of a 60ft-9ft car when making this since doing all that platform work would be a little much for a longer train. 0 Quote Link to comment Share on other sites More sharing options...
JayJay85 Posted December 21, 2010 Share #10 Posted December 21, 2010 Yeah i was thinking of a 60ft-9ft car when making this since doing all that platform work would be a little much for a longer train. all dual Contact and IND tunnels are the same width 0 Quote Link to comment Share on other sites More sharing options...
Grand Concourse Posted December 21, 2010 Share #11 Posted December 21, 2010 10x60=600ft of 10 60ft cars10x51=510ft of 51ft cars 11x51=561ft of 51ft cars Now the reason the can run 11 cars is because it was built to bmt specs, so 10 60ft cars could run there, but the platform would be shaved off due to the width of 60ft cars. The line is the only IRT Line to be on a B Div radio channel. Thanks for confirming this. I've been speculating about this for some time now. I always thought that if they added another diamond crossover for the LL QBP station, the Flushing line could run via Broadway BMT. Of course it would overload the Broadway and there would be a need for 'shuttle service' from TS to QBP. But I still hold on to this one fantasy about the east of QBP using B div cars. As for around the system for 60' long 9' wide 'IRT' cars, some problems I would see are the CH and SF loops, the S-curve south of 180th St on the (2)/(5) and pretty much parts of the original IRT from CH to 96th-Broadway. 0 Quote Link to comment Share on other sites More sharing options...
Fresh Pond Posted December 21, 2010 Share #12 Posted December 21, 2010 Thanks for confirming this. I've been speculating about this for some time now. I always thought that if they added another diamond crossover for the LL QBP station, the Flushing line could run via Broadway BMT. Of course it would overload the Broadway and there would be a need for 'shuttle service' from TS to QBP. But I still hold on to this one fantasy about the east of QBP using B div cars. As for around the system for 60' long 9' wide 'IRT' cars, some problems I would see are the CH and SF loops, the S-curve south of 180th St on the (2)/(5) and pretty much parts of the original IRT from CH to 96th-Broadway. Not be a nitpick but even if a crossover is put there, trains can't run on the Bway line since the stop arm is on the opposite side of the truck, a recipe for disaster. Also, the originan part of the subway (Lower Lex, Upper 7 Av/Bway) can't handle them since the turns would be too sharp. The 42 St , maybe cuz that part is straight for the most part, except the TS end 0 Quote Link to comment Share on other sites More sharing options...
IRT Bronx Express Posted December 22, 2010 Share #13 Posted December 22, 2010 I read somewhere that a B-division can run on the Flushing line, before reaching Woodside – 61st Street. I don't know if it's on the express tracks or the local tracks. 0 Quote Link to comment Share on other sites More sharing options...
Fresh Pond Posted December 22, 2010 Share #14 Posted December 22, 2010 I read somewhere that a B-division can run on the Flushing line, before reaching Woodside – 61st Street. I don't know if it's on the express tracks or the local tracks. I guess the expess track 0 Quote Link to comment Share on other sites More sharing options...
Art Vandelay Posted December 22, 2010 Share #15 Posted December 22, 2010 the 7 being 11 cars long is not a result of its BMT heritage. The BMT was only lengthened for 600 foot trains in the 1960s. 0 Quote Link to comment Share on other sites More sharing options...
Art Vandelay Posted December 22, 2010 Share #16 Posted December 22, 2010 Also- Dual contract tunnels differed from line to line. The 7th Ave line would be substantially harder to convert for B division trains than the Lexington Ave Line would be. 0 Quote Link to comment Share on other sites More sharing options...
Guest lance25 Posted December 23, 2010 Share #17 Posted December 23, 2010 The 7th Ave line would be substantially harder to convert for B division trains than the Lexington Ave Line would be. Now when you say Seventh Avenue, do you mean south of 42nd Street or north (or both)? 0 Quote Link to comment Share on other sites More sharing options...
metsfan Posted December 23, 2010 Share #18 Posted December 23, 2010 I find it funny that PATH cars could only fit on B division even though they are way short. :cool: 0 Quote Link to comment Share on other sites More sharing options...
asidrane Posted December 23, 2010 Share #19 Posted December 23, 2010 I find it funny that PATH cars could only fit on B division even though they are way short. :cool: The difference has to do with width of cars, not length. 0 Quote Link to comment Share on other sites More sharing options...
R36 Preservation Posted December 24, 2010 Share #20 Posted December 24, 2010 the 7 being 11 cars long is not a result of its BMT heritage. 11-car operation began on the Flushing Line just prior to the 1964 World's Fair, as the new R33/R36 cars were being phased in. See this NY Times article from 1963. 0 Quote Link to comment Share on other sites More sharing options...
Grand Concourse Posted December 25, 2010 Share #21 Posted December 25, 2010 Not be a nitpick but even if a crossover is put there, trains can't run on the Bway line since the stop arm is on the opposite side of the truck, a recipe for disaster. Also, the originan part of the subway (Lower Lex, Upper 7 Av/Bway) can't handle them since the turns would be too sharp. The 42 St , maybe cuz that part is straight for the most part, except the TS end True, but then again if B-div trains were to run regularly on the Flushing line, then they'd have to align the trippers on the opposite side. Of course, I said that in general - the original IRT. but thanks for the details. 0 Quote Link to comment Share on other sites More sharing options...
Grand Concourse Posted December 25, 2010 Share #22 Posted December 25, 2010 Now when you say Seventh Avenue, do you mean south of 42nd Street or north (or both)? I'm going to guess maybe the Broadway segment of the line. But I'm not too familiar about 7th Av itself below TS [other than the SF loop]. 0 Quote Link to comment Share on other sites More sharing options...
Fresh Pond Posted December 25, 2010 Share #23 Posted December 25, 2010 True, but then again if B-div trains were to run regularly on the Flushing line, then they'd have to align the trippers on the opposite side. Of course, I said that in general - the original IRT. but thanks for the details. Now if by some divine, impossible (foamer-ish) miracle if they convert the whole Flushing line into B division, then I see no problem with the switch there. But since that's not happening (ever), the only use of that switch would be for work trains and sending cars to CI or 207 0 Quote Link to comment Share on other sites More sharing options...
metsfan Posted December 25, 2010 Share #24 Posted December 25, 2010 The difference has to do with width of cars, not length. I know... Hence why i made the comment about them not fitting even though they are the same length as IRT rolling stock. In fact, they had to be tested on the now defunct elevated lines due to their width before the first tunnel was complete. As i recall the elevated lines were originally steam hauled 2-4 cars, since they didnt make a steam loco narrow enough for a typical trolly line they came up with a compromise loading gauge. At least that's what i can make out from the stuff i've seen/read. Perhaps take a look at some of my other posts before assuming i'm stating something thinking one thing & the topic being another. I've been on all these different systems between here in pa, newark, jersey city and nyc and out onto long island. :cool: - A 0 Quote Link to comment Share on other sites More sharing options...
Grand Concourse Posted December 29, 2010 Share #25 Posted December 29, 2010 Now if by some divine, impossible (foamer-ish) miracle if they convert the whole Flushing line into B division, then I see no problem with the switch there. But since that's not happening (ever), the only use of that switch would be for work trains and sending cars to CI or 207 Heh, well this is probably the one few things I'll foam about. I still think the Flushing line would be better off being part of B division and keep the A divsion with just the current 6 lines. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.